 
|
LDX-020A Factory Direct Automatic Saw Blade Front And Rear Angle Sharpening Machine
Product Details:
| Place of Origin: | Foshan, Guangdong, China |
| Brand Name: | Lidexin |
| Certification: | CU,ISO |
| Model Number: | LDX-020A |
Payment & Shipping Terms:
| Minimum Order Quantity: | 1 unit |
|---|---|
| Price: | Western Union |
| Packaging Details: | Mechanical dimensions (length x width x height): 1600X1100X1800mm |
| Delivery Time: | 10-15 work days |
| Payment Terms: | T/T, Western Union |
| Supply Ability: | 100pcs/mon |
|
Detail Information |
|||
| Saw Blade Aperture: | ￠ 10-220mm | Tooth Surface Angle: | 5 Degrees To+30 Degrees |
|---|---|---|---|
| Tooth Top Back Angle: | 1-20 Degrees | Mechanical Weight: | 800KG |
| Grinding Wheel Linear Speed: | 26m/s | Grinding Wheel Size (outer Diameter X Hole): | (￠ 125mm X ￠32mmX1mm) |
| Highlight: | Rear Angle Saw Blade Sharpening Machine,Automatic Saw Blade Sharpening Machine,High Precision Saw Blade Sharpening Machine |
||
Product Description
LDX-020A Factory direct automatic saw blade front and rear Angle sharpening machine
Specific installation requirements of circular saw blades:
1,The equipment is in good condition, the main shaft has no deformation, no diameter jump, the installation is fixed firmly, no vibration and so on.
2,Check whether the saw blade is damaged, whether the tooth profile is complete, whether the saw plate is smooth and smooth, and whether there are other abnormal phenomena to ensure the safety of use.
3,When assembling, make sure that the direction of the saw blade arrow is consistent with the rotation direction of the equipment spindle.
4,When the saw blade is installed, it is necessary to keep the shaft, chuck and flange clean, the inner diameter of the flange is consistent with the inner diameter of the saw blade, ensure that the flange is tightly combined with the saw blade, install the positioning pin, and tighten the nut. The size of the flange should be appropriate, and the outer diameter should not be less than 1/3 of the diameter of the saw blade.
5,Before starting the equipment, ensure that it is safe to have a single person operate the equipment, point idle, check whether the equipment steering is correct, there is no vibration, after the saw blade is installed, idling for a few minutes, no slippage, swing or jump after normal work.
| Technical parameters: |
| Processing saw blade diameter range: ￠200- ￠1200mm |
| Saw blade aperture: ￠10-220mm |
| Saw blade thickness (steel plate): 1-12mm |
| Tooth pitch: 7-110mm |
| Tooth surface angle: 5 degrees to+20 degrees |
| Tooth top back angle: 1-20 degrees |
| Left and right inclination of teeth: tooth tip/tooth surface 20 degrees |
| Blade grinding stroke range: maximum 25mm (adjustable) teeth/minute |
| Grinding speed: 0.5-6mm/s |
| Working speed: maximum 20 teeth/minute |
| Grinding wheel size (outer diameter x hole): (￠ 125mm x ￠ 32mmX1mm) |
| Negative chamfer grinding: -15 degrees |
| Grinding wheel linear speed: 26m/s |
| Flow rate of coolant water pump: 501/min |
| Volume of coolant cylinder: 85L |
| Total power: 1.85 kW |
| Voltage: three-phase 380v |
| Mechanical weight: 800KG |
| Mechanical dimensions (length x width x height): 1600X1100X1800mm |
| Technical features: |
| 1. This equipment can grind aluminum TCT cutting TCT saw blades, woodworking saw blades, and large alloy saw blades. It is easy to operate and can fully extend the service life of alloy saw blades. Each blade can be reused 15-30 times. This equipment has received praise from many buyers. |
